DJI M210 RTK V2 - RTK Antenna Module

Accurate Drone Navigation with the DJI M210 RTK V2 Antenna Module

The DJI M210 RTK V2 Antenna Module significantly enhances the positioning capabilities of the DJI M210 RTK V2 drone. Equipped with Real-Time Kinematic (RTK) technology, it ensures centimeter-level accuracy, ideal for professional mapping, surveying, and inspection tasks.

Key Features - What The Module Brings On Board

• High-Precision RTK Technology: Delivers centimeter-level positioning accuracy.

• Seamless Integration: Specifically designed for compatibility with the DJI M210 RTK V2 model.

• Enhanced Stability: Improves navigation and stability in flight, essential for high-quality data collection.

Benefits of Using The DJI M210 RTK V2 Antenna Module

• Superior Accuracy: Outperforms standard GPS systems in precision, crucial for accurate aerial data collection.

• Reliability in Complex Environments: Maintains a stable and reliable connection to RTK networks even in challenging conditions.

• Optimized Performance: Tailored to enhance the drone’s capabilities for advanced operational demands.

Industry Specific Applications of the RTK Module

• Detailed Mapping: Enables precise topographic mapping with fine detail.

• Infrastructure Inspection: Ideal for inspecting buildings, bridges, and other infrastructure.

• Aerial Surveying: Provides the accuracy required for professional geological and environmental surveying.

Configuring the RTK Module for M210 RTK V2

1. Install the Intelligent Flight Batteries

• Ensure that you are using the recommended TB55 batteries. Do not use other types of batteries. 

• Insert a pair of batteries into the aircraft.

• Press once on the battery to check the battery level.

• Press again and hold until the batteries turn on or off.

2. Prepare the RTK Antennas

• Unfold the D-RTK antennas from their stowed positions on the aircraft.

• Ensure that each antenna is fully extended and the knobs are tightened securely as indicated by the lock icons on the aircraft.

3. Activate RTK on the DJI Pilot App

• Open the DJI Pilot app on your connected mobile device or the built-in display if using the DJI CrystalSky monitor.

• In the Camera View, tap on the icon in the upper right corner to access settings.

• Tap on "RTK" and then enable the aircraft's RTK mode.

• Select your desired service type (typically Real-Time Kinematic for precise navigation).

4. Connect to the D-RTK 2 Mobile Station

• Make sure that the DJI D-RTK 2 High Precision GNSS Mobile Station for the Matrice series is set up and powered on near your launch area (More on this in the section below)

• Establish a connection between the mobile station and the aircraft via the RTK module. The connection status should be visible in the DJI Pilot app.

5. Verify RTK Signal

• Ensure that the DJI Pilot app displays a strong RTK signal before takeoff. This is crucial for maintaining precision in flight operations, especially in environments where GPS reliability is compromised.

• Check the RTK status for any warnings or errors and resolve them before proceeding.

6. Pre-Flight Checks

• Conduct standard pre-flight checks including calibration, sensor checks, and ensuring the area is clear of obstacles and interference.

7. Take Off

• Once all systems are confirmed operational and RTK is active, proceed with your flight plan.

Settling Up The DJI D-RTK 2 High Precision GNSS Mobile Station

Equipment Setup

1. Assemble the Station: Attach the D-RTK 2 body onto the extension rod and tighten the lock nut. Ensure that the station is level by checking the bubble level.

2. Powering On: Press and hold the power button of the D-RTK 2 Mobile Station to turn it on.

Connection Process

1. Remote Controller and Aircraft Preparation: Ensure that both the aircraft (M210 RTK V2) and the remote controller are powered on and connected to each other.

2. Entering Operating Mode: Press and hold the Operating Mode button until the indicator turns green, then press until it blinks four times, indicating that you are in Operating Mode 4, which is specific to M210 RTK V2.

Linking

1. Initiate Linking: On the D-RTK 2 Mobile Station, press the Link button. The link indicator will blink red and green alternately, indicating that the mobile station is ready to link.

2. Complete Linking: On the M210 RTK V2 aircraft, also press the Link button. The linking process is successful when the indicator lights on both the aircraft and the mobile station turn solid green.

Usage

1. RTK Activation: In the drone's operating software, navigate to the RTK settings and select the D-RTK 2 Mobile Station as the RTK data source.

2. Start Operation: Ensure the RTK status is displayed as "FIX" on the controller's RTK settings screen before starting your flight mission. This status confirms that the RTK module is correctly linked and providing high-precision data.

Troubleshooting

• If the RTK status fails to display "FIX", verify connections and ensure there are no obstructions around the antenna area that might block the GNSS signals.

• Check battery levels regularly and ensure that firmware is up to date for all components involved.

Your Trusted Partner in Drones - Dronefly 

Shopping at Dronefly means gaining access to exceptional drone parts and even better service:

• Professional Support: Have drone questions? Our expert team is here to provide the answers you need.

• Quick Shipping: We pride ourselves on our ability to quickly and reliably deliver your drone parts.

• Authorized Source: Shopping with Dronefly means you're getting real, high-quality products directly from the top brands with valid warranties.